🐞 fix:修改can休眠唤醒条件和时间

Firmware/Project/Cmsemicon/BAT32A239/MDK_ARM/RMR42E.uvprojx

@@ -275,7 +275,7 @@
               </OCR_RVCT3>
               <OCR_RVCT4>
                 <Type>1</Type>
-                <StartAddress>0x8000</StartAddress>
+                <StartAddress>0x0</StartAddress>
                 <Size>0x40000</Size>
               </OCR_RVCT4>
               <OCR_RVCT5>

Firmware/Source/Application/CAN_APP/CAN_CH0_CAN_Communication_Matrix.c

@@ -99,7 +99,7 @@ const st_CANMsgAttribute CAN_CH0_CAN_MSG_CONST_ARRAY[CAN_CH0_ID_TOTAL_MAX] =
             {0x00u, 0x00u, 0x00u, 0x00u, 0x00u, 0x00u, 0x00u, 0x00u},
             {0x00u, 0x00u, 0x00u, 0x00u, 0x00u, 0x00u, 0x00u, 0x00u},
             {0x00u, 0x00u, 0x00u, 0x00u, 0x00u, 0x00u, 0x00u, 0x00u},
-            200ul,
+            2000ul,
             0x125ul,
             ((void *)0),
             (System_Indicator_ON_callback),
@@ -218,6 +218,7 @@ void Set_CAN_ALL_Signal(void)
     else
     {
         MMCU_SeatDetectState = Get_CAN_CH0_ID_125_Sig_MMCU_SeatDetectState(); // 掉线需要做处理
+        MMCU_PowerMode = Get_CAN_CH0_ID_125_Sig_MMCU_PowerMode();
     }
     if (CAN_MSG_Status(&CAN_CH0_CanMsgOp, Co_Can_ConvertSubID_CAN_CH0(CAN_CH0_ID_CAN_0x339_Msg)) == CAN_ERR_OK)
     {

Firmware/Source/Component/PowerManagement/PowerManag_user.c

@@ -69,7 +69,7 @@ static void Power_KL30_Init(void)
 	g_stRTCInformation.u8RTCMonth = 1;   
 	g_stRTCInformation.u8RTCYear = 20; 
     RTE_RTC_Init(g_stRTCInformation);
-    RTE_DEEPSLEEP_GPIO_Interrupt_Enable(KL15_AD_IN,Trigger_Rising);
+    RTE_DEEPSLEEP_GPIO_Interrupt_Enable(CAN_MCU_RXD,Trigger_Rising);
 
 }
 extern uint32_t PowerIgnOffTimeLine;
@@ -91,7 +91,7 @@ static void Power_Wakeup_Init(void)
     TimerM_PWM_CH_Output_init(TIMERM_COUNTER0, TIMERM_CHD, ActiveLevel_High);
     TimerM_PWM_CH_Output_init(TIMERM_COUNTER1, TIMERM_CHB, ActiveLevel_High);
     Telltales_Init();
-    RTE_DEEPSLEEP_GPIO_Interrupt_Enable(KL15_AD_IN,Trigger_Rising);
+    RTE_DEEPSLEEP_GPIO_Interrupt_Enable(CAN_MCU_RXD,Trigger_Rising);
 }
 
 static void Power_LVP_Init(void)
@@ -252,7 +252,7 @@ static Power_Status_em Power_Stay_Sleep(void)
     while (1)
     {
         RTE_WDT_Clear();
-        if (RTE_GPIO_Get_Level(KL15_AD_IN))/* KL15 */
+        if (RTE_GPIO_Get_Level(CAN_MCU_RXD))/* KL15 */
         {
             u8PowerSts = EM_IGN_Wakeup;
             break;

Firmware/Source/Component/System_Monitor/System_Monitor_User.c

@@ -105,18 +105,13 @@ monitorlib_uint8_t Sys_Read_KL15_Valid(void)
 monitorlib_uint8_t System_LINE_KL15(void)
 {
     static monitorlib_uint8_t  u8KL15 = 0;
-
-    if (Sys_Read_KL15_Voltage() >= 5500u )
+    if (Get_CAN_CH0_ID_125_Sig_MMCU_PowerMode() != 0x0 )
     {
         u8KL15 = 1u;
     }
-    else if((Sys_Read_KL15_Voltage() >= 5000u)&&(Sys_Read_KL15_Voltage() < 5500u))
-    {
-        ;
-    }
-    else 
+    else
     {
-        u8KL15 = 0;
+        u8KL15 = 0u;
     }
     return u8KL15;
 }