🐞 fix:下电充电逻辑整改以及增加逻辑括号修改语法错误

Firmware/Source/Application/GUI_Display/GUI_Display.c

@@ -92,7 +92,7 @@ uint8_t Get_CAN_Num_MBMS_Soc_1_Grid(void)
     {
         num++;
     }
-    if(num > 10)
+    if (num > 10)
     {
         num = 10;
     }
@@ -107,7 +107,7 @@ uint8_t Get_CAN_Num_SBMS_Soc_2_Grid(void)
     {
         num++;
     }
-    if(num > 10)
+    if (num > 10)
     {
         num = 10;
     }
@@ -198,6 +198,8 @@ void Gauge_Power_SOC_CHAGING_Display(void)
             }
             else
             {
+                SOC1_Count = 0;
+                SOC2_Count = 0;
                 SEG_SET_EleDial_1SOC(1, Current_1_Grid);
                 SEG_SET_EleDial_2SOC(1, Current_2_Grid);
             }
@@ -302,7 +304,9 @@ void Data_CumulativeWorkHours_EEPROM_Write(void)
                 CumulativeWorkHours_Writeback = CurrentData;
             }
         }
-        else if(CumulativeWorkHours_Writeback != 0)
+        else
+        {
+            if (CumulativeWorkHours_Writeback != 0)
             {
                 if (CurrentData < CumulativeWorkHours_Writeback)
                 {
@@ -314,6 +318,7 @@ void Data_CumulativeWorkHours_EEPROM_Write(void)
                 }
             }
         }
+    }
 }
 
 void Gauge_Clock_All_Display(void)
@@ -490,7 +495,7 @@ void Gauge_CAN_setup_Service(void)
         if (poweroff_time < 3600)
         {
             Gauge_Power_SOC_CHAGING_Display();
-            if (MBMS_TOTALSigAcc == 0x0 && MBMS_TOTALSigCharge == 0x1) // 下电充电)
+            if ((MBMS_TOTALSigAcc == 0x0) && (MBMS_TOTALSigCharge == 0x1)) // 下电充电)
             {
                 Charge_OFF_Flag = 1;
             }
@@ -504,7 +509,7 @@ void Gauge_CAN_setup_Service(void)
             Charge_OFF_Flag = 2;
             SEG_SET_EleDial_1SOC(0, 0);
             SEG_SET_EleDial_2SOC(0, 0);
-            if (MBMS_TOTALSigAcc == 0x1 && MBMS_TOTALSigCharge == 0x1) // 上电充电)
+            if ((MBMS_TOTALSigAcc == 0x1) && (MBMS_TOTALSigCharge == 0x1)) // 上电充电)
             {
                 Charge_OFF_Flag = 0;
                 poweroff_time = 0;
@@ -515,20 +520,17 @@ void Gauge_CAN_setup_Service(void)
     case CHRG_PLUGIN:
     case CHRGEND:
     {
-        if (MBMS_TOTALSigAcc == 0x0 && MBMS_TOTALSigCharge == 0x1) // 下电充电)
+        if ((MBMS_TOTALSigAcc == 0x0) && (MBMS_TOTALSigCharge == 0x1)) // 下电充电)
         {
             Charge_OFF_Flag = 1;
-            Gauge_Power_SOC_pull_Display();
-            SOC1_Count = 0;
-            SOC2_Count = 0;
         }
-        else
+        else if ((MBMS_TOTALSigAcc == 0x1) && (MBMS_TOTALSigCharge == 0x1))
         {
             Charge_OFF_Flag = 0;
+        }
         Gauge_Power_SOC_pull_Display();
         SOC1_Count = 0;
         SOC2_Count = 0;
-        }
         poweroff_time = 0;
     }
     break;