Merge branch 'CJL' into 'dev'

Cjl

See merge request !124

Firmware/Source/Application/GUI_Display/GUI_Display.c

@@ -111,7 +111,7 @@ void Gauge_Service(void)
                 LED_Driver_Channel_Set(LampChannel_0, LampCh0_03, LED_ON);   
                 LED_Driver_Channel_Set(LampChannel_0, LampCh0_04, LED_ON); 
             #endif    
-                SEG_SET_Navigation_STS(Get_Navigation_St_Dis(),Get_Navigation_Code_Dis(),Get_Navigation_Mileage_Dis());
+                //SEG_SET_Navigation_STS(0,0,0);
           
             }
             else
@@ -198,7 +198,7 @@ void Gauge_Service(void)
                 LED_Driver_Channel_Set(LampChannel_0, LampCh0_03, LED_ON);   
                 LED_Driver_Channel_Set(LampChannel_0, LampCh0_04, LED_ON); 
             #endif    
-                SEG_SET_Navigation_STS(Get_Navigation_St_Dis(),Get_Navigation_Code_Dis(),Get_Navigation_Mileage_Dis());
+                //SEG_SET_Navigation_STS(Get_Navigation_St_Dis(),Get_Navigation_Code_Dis(),Get_Navigation_Mileage_Dis());
           
             }
             else

Firmware/Source/Application/SEG_DISPLAY/SEG_DISPLAY.c

@@ -4503,7 +4503,7 @@ void Check_SEG_Display(void)
     SEG_SET_TPMS_DISPLAY(1, a * 11, a * 11, 0, 1, 1);
 #endif
     SEG_SET_Voltage_NUM(1, a * 111);
-    SEG_SET_Navigation_STS(1, 3, a * 111100);
+    //SEG_SET_Navigation_STS(0, 0, 0);
 
     for (i = 0; i < SEG_LED_MAX; i++)
     {
@@ -4576,7 +4576,7 @@ void Checkself_SEG_Display(void)
     min = (Checkself_SEG_step / 3) * 11;
     voltage = (Checkself_SEG_step / 3) * 111;
 
-    SEG_SET_Navigation_STS(1, 3, Mileage);
+    //SEG_SET_Navigation_STS(0, 0, 0);
     SEG_SET_FuelDial(1, Fuel);    
     SEG_SET_CoolantDial(1, Fuel, collant, 1);
     SEG_SET_EspeedDial(1, Espeed / 500);

Firmware/Source/Component/PowerManagement/PowerManag_user.c

@@ -61,9 +61,9 @@ static void Power_KL30_Init(void)
     Data_Read_DiagPara();
     Analog_Signal_Conv_Init();
     BU98R10_Init();   
-    Uart0_Init(115200);
-    Protocol_KL30_Wakeup_Init();
-    BlueTooth_KL30_KL15_Wakeup_Init();
+    //Uart0_Init(115200);
+    //Protocol_KL30_Wakeup_Init();
+    //BlueTooth_KL30_KL15_Wakeup_Init();
     Sys_KL30_Init();
     Checkself_Init();
     Data_Vehicle_Speed_KL30_Init();
@@ -139,9 +139,9 @@ static void Power_Wakeup_Init(void)
     //Light_Sensor_Init_Example();//注意顺序1
     LED_Driver_Init_Example();//注意顺序2
     LED_Driver_Service_Immediate();
-    Protocol_KL30_Wakeup_Init();
-    Uart0_Init(115200);
-    BlueTooth_KL30_KL15_Wakeup_Init();
+    //Protocol_KL30_Wakeup_Init();
+    //Uart0_Init(115200);
+    //BlueTooth_KL30_KL15_Wakeup_Init();
     Fuel_KL30_Init();
     Data_Voltage_Init();
 //    TimerM_PWM_counter_Output_Init(TIMERM_COUNTER0, 400, 64000000);
@@ -193,7 +193,7 @@ static void Power_IG_ON_Init(void)
     Data_Voltage_Init();
     MenuData_TCS_Init();         
     Data_Coolant_Temp_KL15_Init();
-    BlueTooth_KL30_KL15_Wakeup_Init(); 
+    //BlueTooth_KL30_KL15_Wakeup_Init(); 
     Data_TPMS_KL15_WAKE_UP_Init();   
     CAN_TX_SetEnable(&CAN_CH0_CanMsgTxOp, CAN_N_TX_Enable);
     DFlash_init();

Firmware/Source/Component/Telltales/Telltales_user.c

@@ -360,19 +360,19 @@ static void LED_Coolant_Execution(Tellib_uint16_t led_status)
 static Tellib_uint16_t LED_Bluetooth_Judgement(void)
 {
     Tellib_uint16_t LED_STATE = 0u;
-    if (BlueTooth.BLE_St)
-    {
-        LED_STATE = 1u;
-    }
-    else
-    {
-        LED_STATE = 0u;
-    }
+    //if (BlueTooth.BLE_St)
+    //{
+    //    LED_STATE = 1u;
+    //}
+    //else
+    //{
+    //    LED_STATE = 0u;
+    //}
     return LED_STATE;
 }
 static void LED_Bluetooth_Execution(Tellib_uint16_t led_status)
 {
-    if ( led_status == 1u )
+    if ( 0/*led_status == 1u*/ )
     {
         LED_Driver_Channel_Set(LampChannel_0, LampCh0_23_Bluetooth, LED_ON);
         SEG_SET_LED_STS(em_SEG_Bluetooth, 1);

Firmware/Source/System/Sys_Task_List.c

@@ -54,8 +54,8 @@ void Sys_10ms_Tasks(void)
     Fuel_R_Cal(10u);
     TYW_Check_Count();
     Data_TPMS_Processing_Service();
-    Protocol_Service();
-    Protocol_Send_Service();  
+    //Protocol_Service();
+    //Protocol_Send_Service();  
     
     //FaultCode_Service(10u);
     FaultCode_Servers();
@@ -98,7 +98,7 @@ void Sys_100ms_Tasks(void)
     Services_Mileage_Callback();
     Data_Voltage_Processing_Service();
 	S3_ServerCNTT();    
-    Send_UUID_To_Esp32();
+    //Send_UUID_To_Esp32();
     
     if (u8LEDDriverCheckCount >= 10U)
     {
@@ -112,8 +112,8 @@ void Sys_100ms_Tasks(void)
         u8LEDDriverCheckCount++;
     }   
 
-    Clear_Navigation_St(); 
-    Protocol_ESP32_Active_Service();
+    //Clear_Navigation_St(); 
+    //Protocol_ESP32_Active_Service();
     if(Common_GetIgnOffTime() >= 1000)
     {
         CAN_TX_SetEnable(&CAN_CH0_CanMsgTxOp, CAN_N_TX_Disable);

Firmware/Source/UDS/UDS_ISO14229_Services.h

@@ -312,13 +312,13 @@
 #define CheckSumErr       7    // Checksum Error
 #define UnknownPartID     8    // Unknown Part ID
 
-#define SWV 0x128 // 0x100 = 1.00 software version 软件版本号
+#define SWV 0x129 // 0x100 = 1.00 software version 软件版本号
 #define HWV 0x103 // 0x100 = 1.00 hardware version 硬件版本号
 #define BTV 0x100 // 0x100 = 1.00 bootloader version boot程序版本号
-#define INTLV 0x128 // 0x100 = 1.00 internal version 内部版本号
-#define PROG_Y 0x24 // 0x24 = 2024年, program year
-#define PROG_M 0x11 // 0x03 = 3月, program month
-#define PROG_D 0x26 // 0x19 = 19日, program day
+#define INTLV 0x129 // 0x100 = 1.00 internal version 内部版本号
+#define PROG_Y 0x25 // 0x24 = 2024年, program year
+#define PROG_M 0x01 // 0x03 = 3月, program month
+#define PROG_D 0x02 // 0x19 = 19日, program day
 
 /******************************************************************************
  Bootloader Variable