Skip to content

TianYing_ty100
TianYing_ty100
Commit 6db37e83 authored by 陈家乐's avatar 陈家乐
Browse files
Options

Merge branch 'dev' into 'release' 

Dev

See merge request !129
parents 3f1af545 6366e2a7
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 101 additions and 61 deletions
Firmware/Source/Application/GPIO_USER/GpioUser.c
View file @ 6db37e83
......@@ -163,7 +163,7 @@ void Gpio_Init(_GpioUser_Enum InitMode)
/*为满足I2C时序要求*/
RTE_GPIO_Config(RTE_GPIO_PORT12_PIN00, GpioOut_High);//5V切电
RTE_GPIO_Config(RTE_GPIO_PORT06_PIN02, GpioOut_Low); //EE存储SCL
Gen_TimeDelay(100 * 1000u, 50u);
//Gen_TimeDelay(100 * 1000u, 50u);
for (i = 0; i < Gpio_Max; i++)
{
RTE_GPIO_Config(KL30_Init_GpioConfig[i].u16PinNum, KL30_Init_GpioConfig[i].u16PinMode);
......
Firmware/Source/Application/SEG_DISPLAY/SEG_DISPLAY.c
View file @ 6db37e83
......@@ -4539,6 +4539,7 @@ void Checkself_SEG_Display(void)
uint8_t min = 0;
uint32_t ODO = 0;
uint32_t Mileage = 0;
uint16_t speedCount = 0;
if (Common_GetIgnOnTime() >= 200)
{
......
Firmware/Source/Component/BU98R10/BU98R10.c
View file @ 6db37e83
......@@ -90,7 +90,7 @@ void BU98R10_CHIP0_SET_SD_LEVEL(uint8_t Level)
PORT->PM0 &= ~(1<<2);
PORT->PSET0 = (1<<2);
NOP_DelayTime(BU98R10_NOP_TIME);
//NOP_DelayTime(BU98R10_NOP_TIME);
}
else
{
......@@ -100,7 +100,7 @@ void BU98R10_CHIP0_SET_SD_LEVEL(uint8_t Level)
// PORT->PM0 &= ~(1<<2);
PORT->PM0 &= ~(1<<2);
PORT->PCLR0 = (1<<2);
NOP_DelayTime(BU98R10_NOP_TIME);
//NOP_DelayTime(BU98R10_NOP_TIME);
}
}
void BU98R10_CHIP1_SET_SD_LEVEL(uint8_t Level);
......@@ -114,7 +114,7 @@ void BU98R10_CHIP1_SET_SD_LEVEL(uint8_t Level)
// PORT->PM7 &= ~(1<<2);
PORT->PM7 &= ~(1<<2);
PORT->PSET7 = (1<<2);
NOP_DelayTime(BU98R10_NOP_TIME);
//NOP_DelayTime(BU98R10_NOP_TIME);
}
else
{
......@@ -124,7 +124,7 @@ void BU98R10_CHIP1_SET_SD_LEVEL(uint8_t Level)
// PORT->PM7 &= ~(1<<2);
PORT->PM7 &= ~(1<<2);
PORT->PCLR7 = (1<<2);
NOP_DelayTime(BU98R10_NOP_TIME);
//NOP_DelayTime(BU98R10_NOP_TIME);
}
}
void BU98R10_CHIP0_SET_CSB_LEVEL(uint8_t Level);
......@@ -138,7 +138,7 @@ void BU98R10_CHIP0_SET_CSB_LEVEL(uint8_t Level)
// PORT->PM0 &= ~(1<<3);
PORT->PM0 &= ~(1<<3);
PORT->PSET0 = (1<<3);
NOP_DelayTime(BU98R10_NOP_TIME);
//NOP_DelayTime(BU98R10_NOP_TIME);
}
else
{
......@@ -148,7 +148,7 @@ void BU98R10_CHIP0_SET_CSB_LEVEL(uint8_t Level)
// PORT->PM0 &= ~(1<<3);
PORT->PM0 &= ~(1<<3);
PORT->PCLR0 = (1<<3);
NOP_DelayTime(BU98R10_NOP_TIME);
//NOP_DelayTime(BU98R10_NOP_TIME);
}
}
void BU98R10_CHIP1_SET_CSB_LEVEL(uint8_t Level);
......@@ -162,7 +162,7 @@ void BU98R10_CHIP1_SET_CSB_LEVEL(uint8_t Level)
// PORT->PM7 &= ~(1<<1);
PORT->PM7 &= ~(1<<1);
PORT->PSET7 = (1<<1);
NOP_DelayTime(BU98R10_NOP_TIME);
//NOP_DelayTime(BU98R10_NOP_TIME);
}
else
{
......@@ -172,7 +172,7 @@ void BU98R10_CHIP1_SET_CSB_LEVEL(uint8_t Level)
// PORT->PM7 &= ~(1<<1);
PORT->PM7 &= ~(1<<1);
PORT->PCLR7 = (1<<1);
NOP_DelayTime(BU98R10_NOP_TIME);
//NOP_DelayTime(BU98R10_NOP_TIME);
}
}
void BU98R10_CHIP0_SET_SCL_LEVEL(uint8_t Level);
......@@ -186,7 +186,7 @@ void BU98R10_CHIP0_SET_SCL_LEVEL(uint8_t Level)
// PORT->PM0 &= ~(1<<4);
PORT->PM0 &= ~(1<<4);
PORT->PSET0 = (1<<4);
NOP_DelayTime(BU98R10_NOP_TIME);
//NOP_DelayTime(BU98R10_NOP_TIME);
}
else
{
......@@ -196,7 +196,7 @@ void BU98R10_CHIP0_SET_SCL_LEVEL(uint8_t Level)
// PORT->PM0 &= ~(1<<4);
PORT->PM0 &= ~(1<<4);
PORT->PCLR0 = (1<<4);
NOP_DelayTime(BU98R10_NOP_TIME);
//NOP_DelayTime(BU98R10_NOP_TIME);
}
}
void BU98R10_CHIP1_SET_SCL_LEVEL(uint8_t Level);
......@@ -210,7 +210,7 @@ void BU98R10_CHIP1_SET_SCL_LEVEL(uint8_t Level)
// PORT->PM7 &= ~(1<<0);
PORT->PM7 &= ~(1<<0);
PORT->PSET7 = (1<<0);
NOP_DelayTime(BU98R10_NOP_TIME);
//NOP_DelayTime(BU98R10_NOP_TIME);
}
else
{
......@@ -220,7 +220,7 @@ void BU98R10_CHIP1_SET_SCL_LEVEL(uint8_t Level)
// PORT->PM7 &= ~(1<<0);
PORT->PM7 &= ~(1<<0);
PORT->PCLR7 = (1<<0);
NOP_DelayTime(BU98R10_NOP_TIME);
//NOP_DelayTime(BU98R10_NOP_TIME);
}
}
void BU98R10_CHIP0_SET_SD_DIR(uint8_t Dir);
......@@ -233,14 +233,14 @@ void BU98R10_CHIP0_SET_SD_DIR(uint8_t Dir)
// PORT->PM0 &= ~(1<<2);
// RTE_GPIO_Config(BU98R10_CHIP0_SD, RTE_GPIO_DIR_OUT | RTE_GPIO_LEVEL_HIGH);
PORT->PSET0 = (1<<2);
NOP_DelayTime(BU98R10_NOP_TIME);
//NOP_DelayTime(BU98R10_NOP_TIME);
}
else
{
//RTE_GPIO_Config(BU98R10_CHIP0_SD, RTE_GPIO_DIR_IN);
// PORT->PM0 |= (1<<2);
PORT->PCLR0 = (1<<2);
NOP_DelayTime(BU98R10_NOP_TIME);
//NOP_DelayTime(BU98R10_NOP_TIME);
}
}
void BU98R10_CHIP1_SET_SD_DIR(uint8_t Dir);
......@@ -253,14 +253,14 @@ void BU98R10_CHIP1_SET_SD_DIR(uint8_t Dir)
// PORT->P7 |= (1<<2);
// PORT->PM7 &= ~(1<<2);
PORT->PSET7 = (1<<2);
NOP_DelayTime(BU98R10_NOP_TIME);
//NOP_DelayTime(BU98R10_NOP_TIME);
}
else
{
//RTE_GPIO_Config(BU98R10_CHIP1_SD, RTE_GPIO_DIR_IN);
// PORT->PM7 |= (1<<2);
PORT->PCLR7 = (1<<2);
NOP_DelayTime(BU98R10_NOP_TIME);
//NOP_DelayTime(BU98R10_NOP_TIME);
}
}
......@@ -284,7 +284,7 @@ void BU98R10_Init(void)
#if BU98R10_WRITE_AT_SAME_TIME
#if BU98R10_COLORFUL_LCD_MODE
Gen_TimeDelay(120 * 1000u, 50u);
//Gen_TimeDelay(120 * 1000u, 50u);
BU98R10_All_Command_Write(BU98R10_CMD_SWRST);
......
Firmware/Source/Component/LED_Driver/Simulated_IIC_2_Master.c
View file @ 6db37e83
......@@ -20,14 +20,16 @@ unsigned char u8SimulatedIIC2ReceivedACK;
******************************************************************************/
void Simulated_IIC_2_Init(void)
{
RTE_GPIO_Config(IIC_SCL_27030,RTE_GPIO_DIR_IN);
// Gen_TimeDelay(100 * 1000u, 1000u);
// RTE_GPIO_Config(IIC_SCL_27030,RTE_GPIO_DIR_IN);
PORT->PM6 |= (1<<2);
//SIMULATED_IIC_2_SCL_DIR = 0; //SCL被设置为输入,IO口为高阻状态,总线上SCL信号由上拉电阻拉高,此时SCL = 1
Simulated_IIC_2_Delay();
Simulated_IIC_2_Delay();
RTE_GPIO_Config(IIC_SDA_27030,RTE_GPIO_DIR_IN);
// RTE_GPIO_Config(IIC_SDA_27030,RTE_GPIO_DIR_IN);
PORT->PM6 |= (1<<3);
//SIMULATED_IIC_2_SDA_DIR = 0; //SDA被设置为输入,IO口为高阻状态,总线上SDA信号由上拉电阻拉高,此时SDA = 1
Simulated_IIC_2_Delay();
Simulated_IIC_2_Delay();
......@@ -45,23 +47,29 @@ void Simulated_IIC_2_Start(void)
{
u8SimulatedIIC2ReceivedACK = SIMULATED_IIC_2_INVALID_ACK;
RTE_GPIO_Config(IIC_SDA_27030,RTE_GPIO_DIR_IN);
// RTE_GPIO_Config(IIC_SDA_27030,RTE_GPIO_DIR_IN);
PORT->PM6 |= (1<<3);
//SIMULATED_IIC_2_SDA_DIR = 0; //SDA被设置为输入,IO口为高阻状态,总线上SDA信号由上拉电阻拉高,此时SDA = 1
Simulated_IIC_2_Delay();
Simulated_IIC_2_Delay();
RTE_GPIO_Config(IIC_SCL_27030,RTE_GPIO_DIR_IN);
// RTE_GPIO_Config(IIC_SCL_27030,RTE_GPIO_DIR_IN);
PORT->PM6 |= (1<<2);
//SIMULATED_IIC_2_SCL_DIR = 0; //SCL被设置为输入,IO口为高阻状态,总线上SCL信号由上拉电阻拉高,此时SCL = 1
Simulated_IIC_2_Delay();
Simulated_IIC_2_Delay();
RTE_GPIO_Config(IIC_SDA_27030, RTE_GPIO_DIR_OUT|RTE_GPIO_LEVEL_LOW);
// RTE_GPIO_Config(IIC_SDA_27030, RTE_GPIO_DIR_OUT|RTE_GPIO_LEVEL_LOW);
PORT->PM6 &= ~(1<<3);
PORT->PCLR6 = (1<<3);
//SIMULATED_IIC_2_SDA_DIR = 1; //SDA输出0,此时SDA = 0
//SIMULATED_IIC_2_OUT_SDA = 0;
Simulated_IIC_2_Delay();
Simulated_IIC_2_Delay();
RTE_GPIO_Config(IIC_SCL_27030, RTE_GPIO_DIR_OUT|RTE_GPIO_LEVEL_LOW);
// RTE_GPIO_Config(IIC_SCL_27030, RTE_GPIO_DIR_OUT|RTE_GPIO_LEVEL_LOW);
PORT->PM6 &= ~(1<<2);
PORT->PCLR6 = (1<<2);
//SIMULATED_IIC_2_SCL_DIR = 1; //SCL输出0,此时SCL = 0
//SIMULATED_IIC_2_SCL = 0;
Simulated_IIC_2_Delay();
......@@ -77,18 +85,22 @@ void Simulated_IIC_2_Stop(void)
{
u8SimulatedIIC2ReceivedACK = SIMULATED_IIC_2_INVALID_ACK;
RTE_GPIO_Config(IIC_SDA_27030, RTE_GPIO_DIR_OUT|RTE_GPIO_LEVEL_LOW);
// RTE_GPIO_Config(IIC_SDA_27030, RTE_GPIO_DIR_OUT|RTE_GPIO_LEVEL_LOW);
PORT->PM6 &= ~(1<<3);
PORT->PCLR6 = (1<<3);
//SIMULATED_IIC_2_SDA_DIR = 1; //SDA输出0,此时SDA = 0
//SIMULATED_IIC_2_OUT_SDA = 0;
Simulated_IIC_2_Delay();
Simulated_IIC_2_Delay();
RTE_GPIO_Config(IIC_SCL_27030,RTE_GPIO_DIR_IN);
// RTE_GPIO_Config(IIC_SCL_27030,RTE_GPIO_DIR_IN);
PORT->PM6 |= (1<<2);
//SIMULATED_IIC_2_SCL_DIR = 0; //SCL被设置为输入,IO口为高阻状态,总线上SCL信号由上拉电阻拉高,此时SCL = 1
Simulated_IIC_2_Delay();
Simulated_IIC_2_Delay();
RTE_GPIO_Config(IIC_SDA_27030,RTE_GPIO_DIR_IN);
// RTE_GPIO_Config(IIC_SDA_27030,RTE_GPIO_DIR_IN);
PORT->PM6 |= (1<<3);
//SIMULATED_IIC_2_SDA_DIR = 0; //SDA被设置为输入,IO口为高阻状态,总线上SDA信号由上拉电阻拉高,此时SDA = 1
Simulated_IIC_2_Delay();
Simulated_IIC_2_Delay();
......@@ -109,24 +121,33 @@ void Simulated_IIC_2_Transmit_Data(unsigned char Data)
//主机发送器件地址
for (i = 0; i < 8; i++)
{
/* 49:有提高效率的方法么 */
if (Data & 0x80)
RTE_GPIO_Config(IIC_SDA_27030,RTE_GPIO_DIR_IN);//sda线上是1
// RTE_GPIO_Config(IIC_SDA_27030,RTE_GPIO_DIR_IN);//sda线上是1;
PORT->PM6 |= (1<<3);
//SIMULATED_IIC_2_SDA_DIR = 0; //SDA被设置为输入,IO口为高阻状态,总线上SDA信号由上拉电阻拉高,此时SDA = 1
else
{
RTE_GPIO_Config(IIC_SDA_27030, RTE_GPIO_DIR_OUT|RTE_GPIO_LEVEL_LOW);//sda线上是0
PORT->PM6 &= ~(1<<3);
PORT->PCLR6 = (1<<3);
// RTE_GPIO_Config(IIC_SDA_27030, RTE_GPIO_DIR_OUT|RTE_GPIO_LEVEL_LOW);//sda线上是0
//SIMULATED_IIC_2_SDA_DIR = 1; //SDA输出0,此时SDA = 0
//SIMULATED_IIC_2_OUT_SDA = 0;
}
Simulated_IIC_2_Delay();
Simulated_IIC_2_Delay();
RTE_GPIO_Config(IIC_SCL_27030,RTE_GPIO_DIR_IN);//读取sda上的数据
PORT->PM6 |= (1<<2);
// RTE_GPIO_Config(IIC_SCL_27030,RTE_GPIO_DIR_IN);//读取sda上的数据
//SIMULATED_IIC_2_SCL_DIR = 0; //SCL被设置为输入,IO口为高阻状态,总线上SCL信号由上拉电阻拉高,此时SCL = 1
Simulated_IIC_2_Delay();
Simulated_IIC_2_Delay();
RTE_GPIO_Config(IIC_SCL_27030, RTE_GPIO_DIR_OUT|RTE_GPIO_LEVEL_LOW);//拉低scl,允许sda变化
// PORT->PM6 &= ~(1<<3);
// PORT->PCLR6 = (1<<3);
// RTE_GPIO_Config(IIC_SCL_27030, RTE_GPIO_DIR_OUT|RTE_GPIO_LEVEL_LOW);//拉低scl,允许sda变化
PORT->PM6 &= ~(1<<2);
PORT->PCLR6 = (1<<2);
//SIMULATED_IIC_2_SCL_DIR = 1; //SCL输出0,此时SCL = 0
//SIMULATED_IIC_2_SCL = 0;
Simulated_IIC_2_Delay();
......@@ -135,12 +156,16 @@ void Simulated_IIC_2_Transmit_Data(unsigned char Data)
}
//主机接收应答
RTE_GPIO_Config(IIC_SDA_27030,RTE_GPIO_DIR_IN);//主机释放总线,从机在sda发送数据
// PORT->PM6 = (1<<3);
// RTE_GPIO_Config(IIC_SDA_27030,RTE_GPIO_DIR_IN);//主机释放总线,从机在sda发送数据
PORT->PM6 |= (1<<3);
//SIMULATED_IIC_2_SDA_DIR = 0; //设置SDA为输入状态
Simulated_IIC_2_Delay();
Simulated_IIC_2_Delay();
RTE_GPIO_Config(IIC_SCL_27030,RTE_GPIO_DIR_IN);//scl高电平,为了读取从机应答
// PORT->PM6 = (1<<3);
// RTE_GPIO_Config(IIC_SCL_27030,RTE_GPIO_DIR_IN);//scl高电平,为了读取从机应答
PORT->PM6 |= (1<<2);
//SIMULATED_IIC_2_SCL_DIR = 0; //SCL被设置为输入,IO口为高阻状态,总线上SCL信号由上拉电阻拉高,此时SCL = 1
Simulated_IIC_2_Delay();
Simulated_IIC_2_Delay();
......@@ -148,6 +173,8 @@ void Simulated_IIC_2_Transmit_Data(unsigned char Data)
u8SimulatedIIC2ReceivedACK = RTE_GPIO_Get_Level(IIC_SDA_27030);//读取从机应答
//u8SimulatedIIC2ReceivedACK = SIMULATED_IIC_2_IN_SDA;
// PORT->PM6 &= ~(1<<3);
// PORT->PCLR6 = (1<<3);
RTE_GPIO_Config(IIC_SCL_27030, RTE_GPIO_DIR_OUT|RTE_GPIO_LEVEL_LOW);//拉低scl,允许sda变化
//SIMULATED_IIC_2_SCL_DIR = 1; //SCL输出0,此时SCL = 0
//SIMULATED_IIC_2_SCL = 0;
......@@ -167,7 +194,8 @@ unsigned char Simulated_IIC_2_Receive_Data(void)
Data = 0;
RTE_GPIO_Config(IIC_SDA_27030,RTE_GPIO_DIR_IN);//主机释放总线,从机在sda发送数据
// RTE_GPIO_Config(IIC_SDA_27030,RTE_GPIO_DIR_IN);//主机释放总线,从机在sda发送数据
PORT->PM6 |= (1<<3);
//SIMULATED_IIC_2_SDA_DIR = 0; //设置SDA为输入状态
Simulated_IIC_2_Delay();
Simulated_IIC_2_Delay();
......@@ -176,7 +204,8 @@ unsigned char Simulated_IIC_2_Receive_Data(void)
{
Data <<= 1;
RTE_GPIO_Config(IIC_SCL_27030,RTE_GPIO_DIR_IN);////scl拉高,读取从机发送到总线的数据
// RTE_GPIO_Config(IIC_SCL_27030,RTE_GPIO_DIR_IN);////scl拉高,读取从机发送到总线的数据
PORT->PM6 |= (1<<2);
//SIMULATED_IIC_2_SCL_DIR = 0; //SCL被设置为输入,IO口为高阻状态,总线上SCL信号由上拉电阻拉高,此时SCL = 1
Simulated_IIC_2_Delay();
Simulated_IIC_2_Delay();
......@@ -185,7 +214,9 @@ unsigned char Simulated_IIC_2_Receive_Data(void)
Data |= RTE_GPIO_Get_Level(IIC_SDA_27030);//读取从机数据
//Data |= SIMULATED_IIC_2_IN_SDA;
RTE_GPIO_Config(IIC_SCL_27030, RTE_GPIO_DIR_OUT|RTE_GPIO_LEVEL_LOW);//拉低scl,允许sda变化
// RTE_GPIO_Config(IIC_SCL_27030, RTE_GPIO_DIR_OUT|RTE_GPIO_LEVEL_LOW);//拉低scl,允许sda变化
PORT->PM6 &= ~(1<<2);
PORT->PCLR6 = (1<<2);
//SIMULATED_IIC_2_SCL_DIR = 1; //SCL输出0,此时SCL = 0
//SIMULATED_IIC_2_SCL = 0;
Simulated_IIC_2_Delay();
......@@ -210,22 +241,28 @@ void Simulated_IIC_2_Transmit_ACK(unsigned char ACK)
return;
if (ACK)
RTE_GPIO_Config(IIC_SDA_27030,RTE_GPIO_DIR_IN);//用参数来确定是否发送应答信号
// RTE_GPIO_Config(IIC_SDA_27030,RTE_GPIO_DIR_IN);//用参数来确定是否发送应答信号
PORT->PM6 |= (1<<3);
//SIMULATED_IIC_2_SDA_DIR = 0; //SDA被设置为输入,IO口为高阻状态,总线上SDA信号由上拉电阻拉高,此时SDA = 1
else
{
RTE_GPIO_Config(IIC_SDA_27030, RTE_GPIO_DIR_OUT|RTE_GPIO_LEVEL_LOW);//用参数来确定是否发送应答信号
// RTE_GPIO_Config(IIC_SDA_27030, RTE_GPIO_DIR_OUT|RTE_GPIO_LEVEL_LOW);//用参数来确定是否发送应答信号
PORT->PM6 &= ~(1<<3);
PORT->PCLR6 = (1<<3);
//SIMULATED_IIC_2_SDA_DIR = 1; //SDA输出0,此时SDA = 0
//SIMULATED_IIC_2_OUT_SDA = 0;
}
Simulated_IIC_2_Delay();
RTE_GPIO_Config(IIC_SCL_27030,RTE_GPIO_DIR_IN);//scl高电平,为了读取从机应答
// RTE_GPIO_Config(IIC_SCL_27030,RTE_GPIO_DIR_IN);//scl高电平,为了读取从机应答
PORT->PM6 |= (1<<2);
//SIMULATED_IIC_2_SCL_DIR = 0; //SCL被设置为输入,IO口为高阻状态,总线上SCL信号由上拉电阻拉高,此时SCL = 1
Simulated_IIC_2_Delay();
Simulated_IIC_2_Delay();
RTE_GPIO_Config(IIC_SCL_27030, RTE_GPIO_DIR_OUT|RTE_GPIO_LEVEL_LOW);//拉低scl,允许sda变化
PORT->PM6 &= ~(1<<2);
PORT->PCLR6 = (1<<2);
//SIMULATED_IIC_2_SCL_DIR = 1; //SCL输出0,此时SCL = 0
//SIMULATED_IIC_2_SCL = 0;
Simulated_IIC_2_Delay();
......
Firmware/Source/Component/LED_Driver/Simulated_IIC_2_Master.h
View file @ 6db37e83
......@@ -16,7 +16,7 @@
/******************************************************************************
1us延时校准
******************************************************************************/
#define SIMULATED_IIC_2_FREQ_CALIBRATION 40U
#define SIMULATED_IIC_2_FREQ_CALIBRATION 10U
/******************************************************************************
确认信号
......
Firmware/Source/Component/Mileage/Services_Mileage_User.c
View file @ 6db37e83
......@@ -261,16 +261,16 @@ uint32_t Data_User_EEPROM_Read(uint16_t u16BlockID, uint32_t u32Data[], uint16_t
while(trip_writeState != WRITE_COMPLETE)
{
//eeprom_comm_DelayUs(5000);
trip_writeState = eeprom_WriteRecord(EEPROM_BLOCK_03, (uint8_t *)u32Data, u16Len * 4);
timeout++;
if(trip_writeState == WRITE_COMPLETE)
{
break;
}
if(timeout >= 3)
{
return;
}
trip_writeState = eeprom_WriteRecord(EEPROM_BLOCK_03, (uint8_t *)u32Data, u16Len * 4);
timeout++;
if(trip_writeState == WRITE_COMPLETE)
{
break;
}
if(timeout >= 3)
{
return;
}
}
break;
......
Firmware/Source/Component/PowerManagement/PowerManag_user.c
View file @ 6db37e83
......@@ -42,7 +42,6 @@ void PwrMemInit(void)
{
PowerMemInit(&g_stPwrTasks);
}
extern uint8_t Power_KL30_Init_flag;
extern uint8_t AliveCount_KL30_ResettingFlag;
static void Power_KL30_Init(void)
......@@ -50,21 +49,23 @@ static void Power_KL30_Init(void)
CAN_TX_Flag_Init();
ClearODO_Flag = 0;
Gpio_Init(Gpio_KL30_Init);
Analog_Signal_Conv_Init();
Can_Init();
CAN_TX_Init();
Sys_KL30_Init();
Simulated_IIC_2_Init();
eeprom_StoreInfo_Init();
Can_Init();
Data_TPMS_KL30_Init ();
CAN_TX_Init();
//CAN_TX_SetEnable(&CAN_CH0_CanMsgTxOp, CAN_N_TX_Enable);
DFlash_init();
Data_Read_DiagPara();
Analog_Signal_Conv_Init();
BU98R10_Init();
//Uart0_Init(115200);
//Protocol_KL30_Wakeup_Init();
//BlueTooth_KL30_KL15_Wakeup_Init();
Sys_KL30_Init();
Checkself_Init();
Data_Vehicle_Speed_KL30_Init();
Data_Engine_Speed_KL30_Wakeup_Init();
......@@ -112,6 +113,7 @@ static void Power_Wakeup_Init(void)
PowerIgnOffTimeLine = 0;
//RTE_CLOCK_Select_Start();
Gpio_Init(Gpio_WakeUp_Init);
Gen_TimeDelay(100 * 1000u, 50u);
Simulated_IIC_2_Init();
Can_Init();
......
Firmware/Source/UDS/UDS_ISO14229_Services.h
View file @ 6db37e83
......@@ -312,13 +312,13 @@
#define CheckSumErr 7 // Checksum Error
#define UnknownPartID 8 // Unknown Part ID
#define SWV 0x130 // 0x100 = 1.00 software version 软件版本号
#define SWV 0x132 // 0x100 = 1.00 software version 软件版本号
#define HWV 0x103 // 0x100 = 1.00 hardware version 硬件版本号
#define BTV 0x100 // 0x100 = 1.00 bootloader version boot程序版本号
#define INTLV 0x130 // 0x100 = 1.00 internal version 内部版本号
#define INTLV 0x132 // 0x100 = 1.00 internal version 内部版本号
#define PROG_Y 0x25 // 0x24 = 2024年, program year
#define PROG_M 0x01 // 0x03 = 3月, program month
#define PROG_D 0x07 // 0x19 = 19日, program day
#define PROG_M 0x03 // 0x03 = 3月, program month
#define PROG_D 0x06 // 0x19 = 19日, program day
/******************************************************************************
Bootloader Variable
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment