Skip to content

TianYing_ty100
TianYing_ty100
Commit 99041dd4 authored by 高士达's avatar 高士达
Browse files
Options

Merge branch 'dev' into 'release' 

Dev

See merge request !96
parents 77d537ba 2f7f090c
Expand all Show whitespace changes
Inline Side-by-side
Showing with 37 additions and 37 deletions
Firmware/Source/Component/Key/Key_user.c
View file @ 99041dd4
...@@ -20,7 +20,7 @@ void Data_TCS_Set_OnOff(uint8_t u8Data) ...@@ -20,7 +20,7 @@ void Data_TCS_Set_OnOff(uint8_t u8Data)
{ {
uint8_t u8Data1[1u] = {0}; uint8_t u8Data1[1u] = {0};
u8Data1[0u] = u8Data; u8Data1[0u] = u8Data;
eeprom_WriteRecord(EEPROM_BLOCK_08, (uint8_t *)u8Data, 1); eeprom_WriteRecord(EEPROM_BLOCK_08, (uint8_t *)u8Data1, 1);
} }
void Key_Operation_Left(Key_Event_en_t enKeyEvent)//Mode void Key_Operation_Left(Key_Event_en_t enKeyEvent)//Mode
......
Firmware/Source/Component/PowerManagement/PowerManag_user.c
View file @ 99041dd4
...@@ -80,7 +80,7 @@ static void Power_KL30_Init(void) ...@@ -80,7 +80,7 @@ static void Power_KL30_Init(void)
Key_KL30_Init_EXample(); Key_KL30_Init_EXample();
//Light_Sensor_Init_Example();//注意顺序1 //Light_Sensor_Init_Example();//注意顺序1
LED_Driver_Init_Example();//注意顺序2 LED_Driver_Init_Example();//注意顺序2
//LED_Driver_Service_Immediate(); LED_Driver_Service_Immediate();
Data_User_Mileage_KL30Init(); Data_User_Mileage_KL30Init();
Fuel_KL30_Init(); Fuel_KL30_Init();
Data_Voltage_Init(); Data_Voltage_Init();
...@@ -149,7 +149,7 @@ static void Power_Wakeup_Init(void) ...@@ -149,7 +149,7 @@ static void Power_Wakeup_Init(void)
MenuData_TCS_Init(); MenuData_TCS_Init();
//Light_Sensor_Init_Example();//注意顺序1 //Light_Sensor_Init_Example();//注意顺序1
LED_Driver_Init_Example();//注意顺序2 LED_Driver_Init_Example();//注意顺序2
//LED_Driver_Service_Immediate(); LED_Driver_Service_Immediate();
Protocol_KL30_Wakeup_Init(); Protocol_KL30_Wakeup_Init();
Uart0_Init(115200); Uart0_Init(115200);
BlueTooth_KL30_KL15_Wakeup_Init(); BlueTooth_KL30_KL15_Wakeup_Init();
...@@ -227,7 +227,7 @@ static void Power_Sleep_Init(void) ...@@ -227,7 +227,7 @@ static void Power_Sleep_Init(void)
BU98R10_Shutdown(); BU98R10_Shutdown();
Gpio_Init(Gpio_Sleep_Init); Gpio_Init(Gpio_Sleep_Init);
u8LEDDriverCheckCount = 0; u8LEDDriverCheckCount = 0;
//LED_Driver_Service_Immediate(); LED_Driver_Service_Immediate();
LED_Driver_Init_Sleep(); LED_Driver_Init_Sleep();
LED_Driver_Service(); LED_Driver_Service();
Analog_Signal_Conv_Stop(); Analog_Signal_Conv_Stop();
......
Firmware/Source/Component/Service_Interval/Service_Interval.c
View file @ 99041dd4
...@@ -28,7 +28,7 @@ typedef struct ...@@ -28,7 +28,7 @@ typedef struct
Intlib_uint32_t Interval100m; /*设定的里程间隔 0.1km */ Intlib_uint32_t Interval100m; /*设定的里程间隔 0.1km */
Intlib_uint32_t Interval1s; /*设定的时间间隔 1s */ Intlib_uint32_t Interval1s; /*设定的时间间隔 1s */
Intlib_uint32_t MilAfterReset; /*上次复位后里程值 0.1km */ Intlib_uint32_t MilAfterReset; /*上次复位后里程值 0.1km */
Intlib_uint32_t TotalTimer; /*已走动时间 1s */ //Intlib_uint32_t TotalTimer; /*已走动时间 1s */
} DataIntervalSave_t; } DataIntervalSave_t;
static Int_PowerSts g_PowerSts_Cbk; static Int_PowerSts g_PowerSts_Cbk;
...@@ -84,7 +84,7 @@ void Service_Interval_KL30_Init(Intlib_uint8_t *pMemSpace, Maintain_Init_t *pIni ...@@ -84,7 +84,7 @@ void Service_Interval_KL30_Init(Intlib_uint8_t *pMemSpace, Maintain_Init_t *pIni
DataIntervalSave.Interval100m = g_IntervalCalc->Interval100m; DataIntervalSave.Interval100m = g_IntervalCalc->Interval100m;
DataIntervalSave.MilAfterReset = g_IntervalCalc->MilAfterReset; DataIntervalSave.MilAfterReset = g_IntervalCalc->MilAfterReset;
DataIntervalSave.Interval1s = g_IntervalCalc->Interval1s; DataIntervalSave.Interval1s = g_IntervalCalc->Interval1s;
DataIntervalSave.TotalTimer = g_IntervalCalc->CurTimer_1s; //DataIntervalSave.TotalTimer = g_IntervalCalc->CurTimer_1s;
if ( g_EEPromWrite_Cbk != Intlib_NULL ) if ( g_EEPromWrite_Cbk != Intlib_NULL )
{ {
g_EEPromWrite_Cbk(( Intlib_uint32_t * )&DataIntervalSave, (Intlib_uint16_t)(sizeof(DataIntervalSave_t) / 4)); g_EEPromWrite_Cbk(( Intlib_uint32_t * )&DataIntervalSave, (Intlib_uint16_t)(sizeof(DataIntervalSave_t) / 4));
...@@ -95,7 +95,7 @@ void Service_Interval_KL30_Init(Intlib_uint8_t *pMemSpace, Maintain_Init_t *pIni ...@@ -95,7 +95,7 @@ void Service_Interval_KL30_Init(Intlib_uint8_t *pMemSpace, Maintain_Init_t *pIni
g_IntervalCalc->Interval100m = DataIntervalSave.Interval100m; g_IntervalCalc->Interval100m = DataIntervalSave.Interval100m;
g_IntervalCalc->MilAfterReset = DataIntervalSave.MilAfterReset; g_IntervalCalc->MilAfterReset = DataIntervalSave.MilAfterReset;
g_IntervalCalc->Interval1s = DataIntervalSave.Interval1s; g_IntervalCalc->Interval1s = DataIntervalSave.Interval1s;
g_IntervalCalc->CurTimer_1s = DataIntervalSave.TotalTimer; //g_IntervalCalc->CurTimer_1s = DataIntervalSave.TotalTimer;
} }
} }
else else
...@@ -213,7 +213,7 @@ void Service_Interval_Processing(void) ...@@ -213,7 +213,7 @@ void Service_Interval_Processing(void)
DataIntervalSave.Interval100m = g_IntervalCalc->Interval100m; DataIntervalSave.Interval100m = g_IntervalCalc->Interval100m;
DataIntervalSave.MilAfterReset = g_IntervalCalc->MilAfterReset; DataIntervalSave.MilAfterReset = g_IntervalCalc->MilAfterReset;
DataIntervalSave.Interval1s = g_IntervalCalc->Interval1s; DataIntervalSave.Interval1s = g_IntervalCalc->Interval1s;
DataIntervalSave.TotalTimer = g_IntervalCalc->CurTimer_1s; //DataIntervalSave.TotalTimer = g_IntervalCalc->CurTimer_1s;
g_EEPromWrite_Cbk(( Intlib_uint32_t * )&DataIntervalSave, (Intlib_uint16_t)(sizeof(DataIntervalSave_t) / 4)); g_EEPromWrite_Cbk(( Intlib_uint32_t * )&DataIntervalSave, (Intlib_uint16_t)(sizeof(DataIntervalSave_t) / 4));
} }
} }
...@@ -291,37 +291,37 @@ void Service_Interval_SetKm(Intlib_uint32_t IntervalKm) ...@@ -291,37 +291,37 @@ void Service_Interval_SetKm(Intlib_uint32_t IntervalKm)
if (g_IntervalCalc->IntervalDayEnable) if (g_IntervalCalc->IntervalDayEnable)
{ {
DataIntervalSave.Interval1s = g_IntervalCalc->Interval1s; DataIntervalSave.Interval1s = g_IntervalCalc->Interval1s;
DataIntervalSave.TotalTimer = g_IntervalCalc->CurTimer_1s; //DataIntervalSave.TotalTimer = g_IntervalCalc->CurTimer_1s;
} }
else else
{ {
DataIntervalSave.Interval1s = 0u; DataIntervalSave.Interval1s = 0u;
DataIntervalSave.TotalTimer = 0u; //DataIntervalSave.TotalTimer = 0u;
} }
while (u8Errcount < 3) //while (u8Errcount < 3)
{ //{
if (g_EEPromWrite_Cbk != Intlib_NULL) if (g_EEPromWrite_Cbk != Intlib_NULL)
{ {
g_EEPromWrite_Cbk((Intlib_uint32_t *)&DataIntervalSave, (Intlib_uint16_t)(sizeof(DataIntervalSave_t) / 4)); g_EEPromWrite_Cbk((Intlib_uint32_t *)&DataIntervalSave, (Intlib_uint16_t)(sizeof(DataIntervalSave_t) / 4));
} }
if (g_EEPromRead_Cbk != Intlib_NULL) // if (g_EEPromRead_Cbk != Intlib_NULL)
{ // {
g_EEPromRead_Cbk((Intlib_uint32_t *)&ReadDataIntervalSave, (Intlib_uint16_t)(sizeof(DataIntervalSave_t) / 4)); // g_EEPromRead_Cbk((Intlib_uint32_t *)&ReadDataIntervalSave, (Intlib_uint16_t)(sizeof(DataIntervalSave_t) / 4));
} // }
//
if (memcmp(&DataIntervalSave, &ReadDataIntervalSave, sizeof(DataIntervalSave_t)) == 0) // if (memcmp(&DataIntervalSave, &ReadDataIntervalSave, sizeof(DataIntervalSave_t)) == 0)
{ // {
break; // break;
} // }
u8Errcount++; // u8Errcount++;
if(u8Errcount >= 3) // if(u8Errcount >= 3)
{ // {
break; // break;
} // }
Gen_TimeDelay(10 * 1000u, 50u); // Gen_TimeDelay(10 * 1000u, 50u);
} //}
} }
} }
Intlib_uint32_t Get_Interval_SetKm(void) Intlib_uint32_t Get_Interval_SetKm(void)
...@@ -356,7 +356,7 @@ void Service_Interval_SetDay(Intlib_uint32_t IntervalDay) ...@@ -356,7 +356,7 @@ void Service_Interval_SetDay(Intlib_uint32_t IntervalDay)
DataIntervalSave.Interval100m = g_IntervalCalc->Interval100m; DataIntervalSave.Interval100m = g_IntervalCalc->Interval100m;
DataIntervalSave.MilAfterReset = g_IntervalCalc->MilAfterReset; DataIntervalSave.MilAfterReset = g_IntervalCalc->MilAfterReset;
DataIntervalSave.Interval1s = g_IntervalCalc->Interval1s; DataIntervalSave.Interval1s = g_IntervalCalc->Interval1s;
DataIntervalSave.TotalTimer = g_IntervalCalc->CurTimer_1s; //DataIntervalSave.TotalTimer = g_IntervalCalc->CurTimer_1s;
if ( g_EEPromWrite_Cbk != Intlib_NULL ) if ( g_EEPromWrite_Cbk != Intlib_NULL )
{ {
......
Firmware/Source/Component/Service_Interval/Service_Interval_User.c
View file @ 99041dd4
...@@ -80,14 +80,14 @@ static void Service_Interval_Read_EEProm(uint32_t u32Data [], uint16_t u16Len) ...@@ -80,14 +80,14 @@ static void Service_Interval_Read_EEProm(uint32_t u32Data [], uint16_t u16Len)
} }
} }
uint32_t g_ServiceMil100m = 0; //uint32_t g_ServiceMil100m = 0;
uint8_t Get_SERVICE_WARNING_ForCan(void) uint8_t Get_SERVICE_WARNING_ForCan(void)
{ {
uint8_t Res; uint8_t Res;
uint32_t m_Condition_1; uint32_t m_Condition_1;
m_Condition_1 = Service_Interval_GetMil100m(); m_Condition_1 = Service_Interval_GetMil100m();
g_ServiceMil100m = Service_Interval_GetMil100m(); //g_ServiceMil100m = Service_Interval_GetMil100m();
if (m_Condition_1 <= 0u) if (m_Condition_1 <= 0u)
{ {
Res = 1u; /*87606-4*/ Res = 1u; /*87606-4*/
......
Firmware/Source/Device/Cmsemicon/BAT32A239/RTE/CAN/rte_can.c
View file @ 99041dd4
...@@ -69,7 +69,7 @@ uint8_t rte_can_init(can_config_st_t *config) ...@@ -69,7 +69,7 @@ uint8_t rte_can_init(can_config_st_t *config)
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_OUT; GPIO_InitStruct.GPIO_Mode = GPIO_Mode_OUT;
GPIO_InitStruct.GPIO_Level = GPIO_Level_HIGH; GPIO_InitStruct.GPIO_Level = GPIO_Level_HIGH;
GPIO_InitStruct.GPIO_Ctrl = GPIO_Control_DIG; GPIO_InitStruct.GPIO_Ctrl = GPIO_Control_DIG;
//GPIO_InitStruct.GPIO_OType = GPIO_OType_PP; GPIO_InitStruct.GPIO_OType = GPIO_OType_PP;
GPIO_Init(GPIO_PORT5, &GPIO_InitStruct); GPIO_Init(GPIO_PORT5, &GPIO_InitStruct);
/* CRXD pin init */ /* CRXD pin init */
......
Firmware/Source/Device/Cmsemicon/BAT32A239/RTE/RTC/RTE_RTC.c
View file @ 99041dd4
...@@ -161,7 +161,7 @@ void RTE_RTC_Init(RTC_Information_st_t g_stRTCInformation) ...@@ -161,7 +161,7 @@ void RTE_RTC_Init(RTC_Information_st_t g_stRTCInformation)
RTC_InitStructure.RTC_1HZ_Output = DISABLE; //RTC1HZ diable output RTC_InitStructure.RTC_1HZ_Output = DISABLE; //RTC1HZ diable output
RTC_Init(&RTC_InitStructure); RTC_Init(&RTC_InitStructure);
RTC->SUBCUD = 0x1D; RTC->SUBCUD = 0x1F;
//ISR_Register(RTC_IRQn, rtc_interrupt); //RTC????��????��??��??�� //ISR_Register(RTC_IRQn, rtc_interrupt); //RTC????��????��??��??��
......
Firmware/Source/System/Sys_Task_List.c
View file @ 99041dd4
...@@ -137,7 +137,7 @@ void Sys_Exact_50us_Tasks(void) ...@@ -137,7 +137,7 @@ void Sys_Exact_50us_Tasks(void)
if(task_100ms >= 2000) if(task_100ms >= 2000)
{ {
task_100ms = 0u; task_100ms = 0u;
if(Milleage_InitFlag == 0X5AA53AA3UL) if(Get_MileageInit_Status() == 0X5AA53AA3UL)
{ {
Data_Mileage_ISR(); Data_Mileage_ISR();
} }
......
Firmware/Source/UDS/UDS_ISO14229_Services.h
View file @ 99041dd4
...@@ -312,13 +312,13 @@ ...@@ -312,13 +312,13 @@
#define CheckSumErr 7 // Checksum Error #define CheckSumErr 7 // Checksum Error
#define UnknownPartID 8 // Unknown Part ID #define UnknownPartID 8 // Unknown Part ID
#define SWV 0x120 // 0x100 = 1.00 software version 软件版本号 #define SWV 0x121 // 0x100 = 1.00 software version 软件版本号
#define HWV 0x103 // 0x100 = 1.00 hardware version 硬件版本号 #define HWV 0x103 // 0x100 = 1.00 hardware version 硬件版本号
#define BTV 0x100 // 0x100 = 1.00 bootloader version boot程序版本号 #define BTV 0x100 // 0x100 = 1.00 bootloader version boot程序版本号
#define INTLV 0x120 // 0x100 = 1.00 internal version 内部版本号 #define INTLV 0x121 // 0x100 = 1.00 internal version 内部版本号
#define PROG_Y 0x24 // 0x24 = 2024年, program year #define PROG_Y 0x24 // 0x24 = 2024年, program year
#define PROG_M 0x09 // 0x03 = 3月, program month #define PROG_M 0x09 // 0x03 = 3月, program month
#define PROG_D 0x10 // 0x19 = 19日, program day #define PROG_D 0x14 // 0x19 = 19日, program day
/****************************************************************************** /******************************************************************************
Bootloader Variable Bootloader Variable
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment