🐞 fix:45097 【天鹰TY100】【蓄电池指示灯】信号掉线恢复，未按上行策略走

Firmware/Source/Component/Telltales/Telltales_user.c

@@ -43,6 +43,7 @@ static void            LED_Tire_Pressure_Execution(Tellib_uint16_t led_status);
 
 Led_HighBeam_Count HighBeam_Timer;
 Tellib_uint16_t LED_Battery_Voltage = 0;
+Tellib_uint16_t Battery_Voltage_valid = 0;
 const LED_Attribute_st LED_Attribute [ LED_Max ] = {
     /*  指示灯索引                  是否自检          外部信号自检           工作电源状态       自检开始时间    自检持续时间       指示灯点亮条件                           指示灯执行函数               */
     
@@ -82,6 +83,7 @@ void Telltales_UserInit(void)
     HighBeam_Timer.LED_Turnon       = 0;
     HighBeam_Timer.LED_Turnoff      = 0;
     LED_Battery_Voltage             = 0;
+    Battery_Voltage_valid           = 0;
 }
   
 static Tellib_uint16_t LED_High_Beam_Judgement(void)
@@ -509,25 +511,44 @@ static Tellib_uint16_t LED_Low_Batt_Judgement(void)
 {
     Tellib_uint16_t LED_STATE = 0u;
     Tellib_uint16_t Battery_Voltage = 0u;
+    
     Battery_Voltage = Get_CAN_CH0_ID_401_Sig_ECU_Battery_Voltage();
     if((CAN_MSG_Status(&CAN_CH0_CanMsgOp, CAN_CH0_ID_CAN_0x401_Msg_Count) == CAN_SIG_LOST) )
     {
         LED_Battery_Voltage = 1; 
+        Battery_Voltage_valid = 0;
     }
     else
     {
-        if (Battery_Voltage < 118)
-        {
-            LED_Battery_Voltage = 1; 
-        }
-        else if (Battery_Voltage >= 120)
+        if(Battery_Voltage_valid == 1)
         {
-            LED_Battery_Voltage = 0;
+            Battery_Voltage_valid = 1;
+            if (Get_Battery_Voltage() < 118)
+            {
+                LED_Battery_Voltage = 1; 
+            }
+            else if (Get_Battery_Voltage() >= 120)
+            {
+                LED_Battery_Voltage = 0;
+            }
+            else
+            {
+                ;
+            }
         }
         else
         {
-            ;
+            Battery_Voltage_valid = 1;
+            if (Get_Battery_Voltage() < 118)
+            {
+                LED_Battery_Voltage = 1; 
+            }
+            else
+            {
+                LED_Battery_Voltage = 0; 
+            }
         }
+        
     }
     LED_STATE = LED_Battery_Voltage;
     return LED_STATE;