/*====================================================================================================================*/
/* Project      = AUTOSAR Renesas X2x MCAL Components                                                                 */
/* Module       = Icu_Ram.c                                                                                           */
/* SW-VERSION   = 1.5.0                                                                                               */
/*====================================================================================================================*/
/*                                                     COPYRIGHT                                                      */
/*====================================================================================================================*/
/* (c) 2020-2022 Renesas Electronics Corporation. All rights reserved.                                                */
/*====================================================================================================================*/
/* Purpose:                                                                                                           */
/* This file contains Global variable definitions of ICU Driver                                                       */
/*                                                                                                                    */
/*====================================================================================================================*/
/*                                                                                                                    */
/* Unless otherwise agreed upon in writing between your company and Renesas Electronics Corporation the following     */
/* shall apply!                                                                                                       */
/*                                                                                                                    */
/* Warranty Disclaimer                                                                                                */
/*                                                                                                                    */
/* There is no warranty of any kind whatsoever granted by Renesas. Any warranty is expressly disclaimed and excluded  */
/* by Renesas, either expressed or implied, including but not limited to those for non-infringement of intellectual   */
/* property, merchantability and/or fitness for the particular purpose.                                               */
/*                                                                                                                    */
/* Renesas shall not have any obligation to maintain, service or provide bug fixes for the supplied Product(s) and/or */
/* the Application.                                                                                                   */
/*                                                                                                                    */
/* Each User is solely responsible for determining the appropriateness of using the Product(s) and assumes all risks  */
/* associated with its exercise of rights under this Agreement, including, but not limited to the risks and costs of  */
/* program errors, compliance with applicable laws, damage to or loss of data, programs or equipment, and             */
/* unavailability or interruption of operations.                                                                      */
/*                                                                                                                    */
/* Limitation of Liability                                                                                            */
/*                                                                                                                    */
/* In no event shall Renesas be liable to the User for any incidental, consequential, indirect, or punitive damage    */
/* (including but not limited to lost profits) regardless of whether such liability is based on breach of contract,   */
/* tort, strict liability, breach of warranties, failure of essential purpose or otherwise and even if advised of the */
/* possibility of such damages. Renesas shall not be liable for any services or products provided by third party      */
/* vendors, developers or consultants identified or referred to the User by Renesas in connection with the Product(s) */
/* and/or the Application.                                                                                            */
/*                                                                                                                    */
/*====================================================================================================================*/
/* Environment:                                                                                                       */
/*              Devices:        X2x                                                                                   */
/*====================================================================================================================*/

/***********************************************************************************************************************
**                                              Revision Control History                                              **
***********************************************************************************************************************/
/*
 * 1.4.3:  17/04/2022  : Merge QAC message from U2Ax, E2x and U2Bx
 * 1.4.1:  18/10/2021  : Add QAC message 9.5.0
 *         15/09/2021  : Rename TimerChannelConfig to ChannelUserRegConfig
 *                       Add Icu_GpChannelRamData, Icu_GpSignalMeasurementData
 * 1.3.2:  30/08/2021  : Change from #include "Icu_MemMap.h" to #include "Icu_Mapping.h".
 * 1.3.1:  02/07/2021  : Format source code to 120 characters
 * 1.2.0:  17/07/2020  : Release
 * 1.1.0:  19/06/2020  : Release
 * 1.0.0:  25/03/2020  : Initial Version
 */
/**********************************************************************************************************************/

/***********************************************************************************************************************
**                                               Coding Rule Violations                                               **
***********************************************************************************************************************/
/* Message (2:0857)    : Number of macro definitions exceeds 1024 - program does not conform strictly to ISO:C90.     */
/* Rule                : MISRA C:2012 Dir-1.1                                                                         */
/* JV-01 Justification : The number of macro depend on module code size. There is no issue when number of macro is    */
/*                       over 1024                                                                                    */
/*       Verification  : However, part of the code is verified manually and it is not having any impact.              */
/**********************************************************************************************************************/
/* Message (1:1531)    : The object '%1s' is referenced in only one translation unit - but not the one in which it    */
/*                       is defined.                                                                                  */
/* Rule                : CERTCCM DCL15, DCL19, MISRA C:2012 Rule-8.7                                                  */
/* JV-01 Justification : Followed coding rules, the objects (global variable/const) is define in separated source     */
/*                       file, so this could be accepted                                                              */
/*       Verification  : However, part of the code is verified manually and it is not having any impact.              */
/**********************************************************************************************************************/
/* Message (1:1533)    : The object '%1s' is only referenced by function '%2s'.                                       */
/* Rule                : MISRA C:2012 Rule-8.9                                                                        */
/* JV-01 Justification : This is accepted, due to the object is defined in separated source C file to followed        */
/*                       coding rule                                                                                  */
/*       Verification  : However, part of the code is verified manually and it is not having any impact.              */
/**********************************************************************************************************************/
/* Message (2:3432)    : Simple macro argument expression is not parenthesized.                                       */
/* Rule                : MISRA C:2012 Rule-20.7                                                                       */
/* JV-01 Justification : Compiler keyword (macro) is defined and used followed AUTOSAR standard rule. It is accepted. */
/*       Verification  : However, part of the code is verified manually and it is not having any impact.              */
/**********************************************************************************************************************/
/* Message (4:5087)    : Use of #include directive after code fragment.                                               */
/* Rule                : MISRA C:2012 Rule-20.1                                                                       */
/* JV-01 Justification : This is done as per Memory Requirement, (MEMMAP003 - Specification of Memory Mapping).       */
/*       Verification  : However, part of the code is verified manually and it is not having any impact.              */
/**********************************************************************************************************************/

/***********************************************************************************************************************
**                                                  Include Section                                                   **
***********************************************************************************************************************/

/* Included for RAM variable declarations */
#include "Icu_Ram.h"                                                                                                    /* PRQA S 0857 # JV-01 */

/***********************************************************************************************************************
**                                                Version Information                                                 **
***********************************************************************************************************************/
/* AUTOSAR release version information */
#define ICU_RAM_C_AR_RELEASE_MAJOR_VERSION    ICU_AR_RELEASE_MAJOR_VERSION_VALUE
#define ICU_RAM_C_AR_RELEASE_MINOR_VERSION    ICU_AR_RELEASE_MINOR_VERSION_VALUE
#define ICU_RAM_C_AR_RELEASE_REVISION_VERSION ICU_AR_RELEASE_REVISION_VERSION_VALUE
/* File version information */
#define ICU_RAM_C_SW_MAJOR_VERSION            ICU_SW_MAJOR_VERSION_VALUE
#define ICU_RAM_C_SW_MINOR_VERSION            ICU_SW_MINOR_VERSION_VALUE

/***********************************************************************************************************************
**                                                   Version Check                                                    **
***********************************************************************************************************************/
#if (ICU_RAM_AR_RELEASE_MAJOR_VERSION != ICU_RAM_C_AR_RELEASE_MAJOR_VERSION)
  #error "Icu_Ram.c : Mismatch in Release Major Version"
#endif /* End of #if (ICU_RAM_AR_RELEASE_MAJOR_VERSION != \
                                          ICU_RAM_C_AR_RELEASE_MAJOR_VERSION) */

#if (ICU_RAM_AR_RELEASE_MINOR_VERSION != ICU_RAM_C_AR_RELEASE_MINOR_VERSION)
  #error "Icu_Ram.c : Mismatch in Release Minor Version"
#endif /* End of #if (ICU_RAM_AR_RELEASE_MINOR_VERSION != \
                                          ICU_RAM_C_AR_RELEASE_MINOR_VERSION) */

#if (ICU_RAM_AR_RELEASE_REVISION_VERSION != ICU_RAM_C_AR_RELEASE_REVISION_VERSION)
  #error "Icu_Ram.c : Mismatch in Release Revision Version"
#endif /* End of #if (ICU_RAM_AR_RELEASE_REVISION_VERSION != \
                                       ICU_RAM_C_AR_RELEASE_REVISION_VERSION) */

#if (ICU_RAM_SW_MAJOR_VERSION != ICU_RAM_C_SW_MAJOR_VERSION)
  #error "Icu_Ram.c : Mismatch in Software Major Version"
#endif /* End of #if (ICU_RAM_SW_MAJOR_VERSION != ICU_RAM_C_SW_MAJOR_VERSION) */

#if (ICU_RAM_SW_MINOR_VERSION != ICU_RAM_C_SW_MINOR_VERSION)
  #error "Icu_Ram.c : Mismatch in Software Minor Version"
#endif /* End of #if (ICU_RAM_SW_MINOR_VERSION != ICU_RAM_C_SW_MINOR_VERSION) */

/***********************************************************************************************************************
**                                                   Global Symbols                                                   **
***********************************************************************************************************************/

#define ICU_START_SEC_VAR_NO_INIT_UNSPECIFIED
#include "Icu_Mapping.h"

/* Holds the status of ICU Driver Component */
VAR(Icu_ModeType, ICU_VAR_NO_INIT) Icu_GenModuleMode;                                                                   /* PRQA S 1533 # JV-01 */

#define ICU_STOP_SEC_VAR_NO_INIT_UNSPECIFIED
#include "Icu_Mapping.h"                                                                                                /* PRQA S 5087 # JV-01 */

#define ICU_START_SEC_VAR_NO_INIT_PTR
#include "Icu_Mapping.h"                                                                                                /* PRQA S 5087 # JV-01 */
/* Global pointer variable for channel configuration */
P2CONST(Icu_ChannelConfigType, ICU_VAR_NO_INIT, ICU_CONFIG_DATA) volatile Icu_GpChannelConfig;

/* Global pointer variable for Timer channel configuration */
P2CONST(Icu_ChannelUserRegConfigType, ICU_VAR_NO_INIT, ICU_CONFIG_DATA) volatile Icu_GpChannelUserRegConfig;            /* PRQA S 1533 # JV-01 */

/* Global pointer to the address of Channel RAM data */
P2VAR(Icu_ChannelRamDataType, ICU_VAR_NO_INIT, ICU_CONFIG_DATA) volatile Icu_GpChannelRamData;                          /* PRQA S 3432 # JV-01 */

/* Global pointer to the address of Edge Count RAM data */
P2VAR(Icu_EdgeCountModeRamDatatype, ICU_VAR_NO_INIT, ICU_CONFIG_DATA) volatile Icu_GpEdgeCountData;                     /* PRQA S 3432 # JV-01 */

/* Global pointer variable for Timestamp channel data */
P2VAR(Icu_TimeStampChannelRamDataType, ICU_VAR_NO_INIT, ICU_CONFIG_DATA) volatile Icu_GpTimeStampData;                  /* PRQA S 1533, 3432 # JV-01, JV-01 */

/* Global pointer to the address of Signal Measure RAM data */
volatile P2VAR(Icu_SignalMeasurementModeRamDataType, ICU_VAR_NO_INIT, ICU_CONFIG_DATA) Icu_GpSignalMeasurementData;     /* PRQA S 3432 # JV-01 */

#define ICU_STOP_SEC_VAR_NO_INIT_PTR
#include "Icu_Mapping.h"                                                                                                /* PRQA S 5087 # JV-01 */

#define ICU_START_SEC_VAR_NO_INIT_32
#include "Icu_Mapping.h"                                                                                                /* PRQA S 5087 # JV-01 */
#if (ICU_REPORT_WAKEUP_SOURCE == STD_ON)
/* Holds the wake up source information */
VAR(uint32, ICU_VAR_NO_INIT) Icu_GulWakeupSource;                                                                       /* PRQA S 1531 # JV-01 */
#endif

#define ICU_STOP_SEC_VAR_NO_INIT_32
#include "Icu_Mapping.h"                                                                                                /* PRQA S 5087 # JV-01 */

/* Functionality related to R4.0 */
#define ICU_START_SEC_VAR_INIT_BOOLEAN
#include "Icu_Mapping.h"                                                                                                /* PRQA S 5087 # JV-01 */

#if (ICU_DEV_ERROR_DETECT == STD_ON)
/* Holds the status of Initialization */
volatile VAR(boolean, ICU_VAR_INIT) Icu_GblDriverStatus = ICU_UNINITIALIZED;                                            /* PRQA S 1531 # JV-01 */
#endif /* End of #if (ICU_DEV_ERROR_DETECT == STD_ON) */

/* Functionality related to R4.0 */
#define ICU_STOP_SEC_VAR_INIT_BOOLEAN
#include "Icu_Mapping.h"                                                                                                /* PRQA S 5087 # JV-01 */

/***********************************************************************************************************************
**                                                Function Definitions                                                **
***********************************************************************************************************************/

/***********************************************************************************************************************
**                                                    End of File                                                     **
***********************************************************************************************************************/
