feat: U48,外部信号设置过电流

GHS/App/PC_Control.c

@@ -4,9 +4,10 @@
 #include "SGM4591Q.h"
 #include "Dio.h"
 #include "CAN_CH0_CAN_Communication_Matrix.h"
+#include "Simulated_SPI_Master.h"
 /*此文件用于上位机控制U16和U48*/
 
-uint8_t state_23 = 1;
+uint8_t state_23 = 0;
 /*U16*/
 void PC_Control_U16(void)
 {
@@ -45,9 +46,14 @@ void PC_Control_U16(void)
 }
 
 /*U48*/
-uint8_t state_U48_1 = 1;
+uint8_t state_U48_1 = 0;
 void PC_Control_U48(void)
 {
+  static uint8_t U48_Overcurrent_Last = 0;
+
+  uint8_t U48_Overcurrent = 0;
+  uint8_t U48_Overcurrent_LOW = 0;
+  uint8_t U48_Overcurrent_HIGH = 0;
   state_U48_1 = Get_ID_18000000_Sig_PC_Control_U48_Power();
   /*20A_OUT2*/
   if (state_U48_1 == 1)
@@ -62,5 +68,16 @@ void PC_Control_U48(void)
   {
     ;
   }
-  Get_ID_18000000_Sig_PC_Control_U48_CurrentControlSet();
+  U48_Overcurrent_LOW = Get_ID_18000000_Sig_PC_Control_U48_LOW();
+  U48_Overcurrent_HIGH = Get_ID_18000000_Sig_PC_Control_U48_HIGH();
+  U48_Overcurrent = U48_Overcurrent_LOW + U48_Overcurrent_HIGH << 3;
+  if (U48_Overcurrent_Last != U48_Overcurrent)
+  {
+    /*3.过电流高/低选择*/
+    MC33984EHFK_CS1_Output_Low();
+    Sim_SPI_Master_0_Byte_Write(MC33984_SOCHLR_0);
+    Sim_SPI_Master_0_Byte_Write(0x07);
+    MC33984EHFK_CS1_Output_High();
+    U48_Overcurrent_Last = U48_Overcurrent;
+  }
 }

GHS/App/SGM4591Q.h

@@ -80,7 +80,7 @@ extern volatile SGM4591Q_Pin_en SGM4591Q_Chip4_3_Segment1;
 extern volatile SGM4591Q_Pin_en SGM4591Q_Chip4_4_Segment0;
 extern volatile SGM4591Q_Pin_en SGM4591Q_Chip4_4_Segment1;
 
-
 extern uint16_t ADC_4;
+void SGM4591Q_Init(void);
 void SGM4591Q_Global_Control(uint8_t Chip, uint8_t Segment);
 void SGM4591Q_Control(void);

GHS/System/Sys_Task_List.c

@@ -38,18 +38,10 @@ void Sys_20ms_Tasks(void)
 {
     // Can_MainFunction_Read();
 }
-uint32_t u32IOConvert;
 uint8_t u8test;
 void Sys_50ms_Tasks(void)
 {
   u8test = Get_ID_18FF30E1_Sig_ECAS_Decrease();
-
-    u32IOConvert++;
-    // if (u32IOConvert > 100)
-    // {
-        // Port_SetPinDirection(Port_Config_PortGroup24_PortPin13,PORT_PIN_IN);
-        // Dio_WriteChannel(DioConf_DioChannel_P24_13,STD_LOW);
-    // }
 }
 uint16_t g_u16ADCValue[16] = {0};
 uint8_t g_u8secstatus = 0U;
@@ -79,20 +71,11 @@ uint16_t ADC_Input_Voltage_Calc(uint16_t u16ADCSample, uint16_t u16ADCRes, uint1
 
     return u16Result;
 }
-uint32_t time_test=0;
-uint8_t aaaaaaData = 0U;
-uint8_t bcvcb = 0U;
-// uint8 GaaByteAccfdfss[100] = { 0 };
+uint32_t time_test = 0;
 void Sys_100ms_Tasks(void)
 {
   time_test++;
-    // Dio_FlipChannel(DioConf_DioChannel_P56DioChannel);
-    // Dio_FlipChannel(DioConf_DioChannel_P24_13);
-    // g_u8secstatus++;
-
-        // Dio_FlipChannel(DioConf_DioChannel_P02_08);
 
-        /* Starts the conversion of group */
   Adc_StartGroupConversion(AdcConf_AdcGroup_AdcGroup_000);
 
   while (ADC_STREAM_COMPLETED != Adc_GetGroupStatus(AdcConf_AdcGroup_AdcGroup_000))
@@ -103,48 +86,18 @@ void Sys_100ms_Tasks(void)
   for (uint8_t i = 0; i < 16; i++)
   {
     g_u16ADCValue[i] = ADC_Input_Voltage_Calc(g_u16ADCValue[i], 4096, 5000);
-          if (i==4)
+    if (i == 4)
     {
-            ADC_4=g_u16ADCValue[i];
+      ADC_U16 = g_u16ADCValue[i];
+    }
+    if (i == 0)
+    {
+      ADC_U48 = g_u16ADCValue[i];
     }
   }
-    // SGM4591Q_Control();
-    
-  // Port_SetPinDirection(Port_Config_PortGroup4_PortPin8, PORT_PIN_OUT);
   Dio_WriteChannel(DioConf_DioChannel_P04_08, STD_LOW);
   MC33984EHFK_Read();
 
-  // if (bcvcb == 1)
-  // {
-  //   Dio_WriteChannel(DioConf_DioChannel_P02_05, STD_HIGH);
-  //   Dio_WriteChannel(DioConf_DioChannel_P02_01, STD_HIGH);
-  //   bcvcb = 0;
-  // }
-  // if (bcvcb == 2)
-  // {
-  //   Dio_WriteChannel(DioConf_DioChannel_P02_05, STD_LOW);
-  //   Dio_WriteChannel(DioConf_DioChannel_P02_01, STD_LOW);
-  //   bcvcb = 0;
-  // }
-
-  // if (aaaaaaData < 99)
-  // {
-  //   aaaaaaData++;
-  // }
-  // else
-  // {
-  //   aaaaaaData = 0;
-  // }
-
-  // GaaByteAccfdfss[aaaaaaData] = Dio_ReadChannel(Port_Config_PortGroup2_PortPin1);
-  // abbaaaData= Dio_ReadChannel(Port_Config_PortGroup22_PortPin3);
-  // Port_SetPinDirection(Port_Config_PortGroup22_PortPin3, PORT_PIN_IN);
-    
-  // Port_SetPinDirection(Port_Config_PortGroup22_PortPin4, PORT_PIN_IN);
-  
-  // Port_SetPinDirection(Port_Config_PortGroup22_PortPin4, PORT_PIN_OUT);
-  
-  // Port_SetPinDirection(Port_Config_PortGroup22_PortPin3, PORT_PIN_OUT);
   SGMCD1020Q_MainFunction();
   PC_Control_U16();
   PC_Control_U48();